Chinese Factory Finely Processed Carbide Nail Bits Row Drill for Woodworking

• Customization: Available
• Coating: Uncoated
• Tooth Form: Straight Tooth
• Model NO.: Customized size
• Tooth Space: Dense Tooth
• Structure: Insert Type
• Material: Tungsten Carbide
• Type: Side Milling Cutter
• Grade: Yg6, Yg8, Yg10, Yg15, Yt14, Yt05, Yt15, Ys2t
• Hardness: 85-92hra
• Density: 14-14.9g/cm3
• T.R.S: 2800-3000MPa
• Grain Size: Micron Fine, Fine, Medium, Coarse
• Transport Package: by Carton/Pallet
• Specification: Per client
• Trademark: OEM
• Origin: Hunan, China
• HS Code: 8208101900
• Production Capacity: 50ton/Year

Product Description

Product Description

There are several shapes for customers choice.

• Woodworking carbide hinge boring bits are used to drill the pockets for European style hinges such as Blum and Hafele. Carbide tipped for maximum tool life. Cutting diameters from 15mm to 60mm. 57mm and 70mm lengths. Available in both right and left rotation. Specification as below:

Order No.	Drill Dia	Shank Length	Total Length	Rotation
JC15K3057RH01/LH01	15	30	57	R/L
JC15K3070RH01/LH01	15	30	70	R/L
JC16K3057RH01/LH01	16	30	57	R/L
JC16K3070RH01/LH01	16	30	70	R/L
JC17K3070RH01/LH01	17	30	70	R/L
JC18K3070LH01/LH01	18	30	70	R/L
JC19K3070RH01/LH01	19	30	70	R/L
JC20K3057RH01/LH01	20	30	57	R/L
JC20K3070RH01/LH01	20	30	70	R/L

• Woodworking V-Point Through Hole Drill Bits: this is a special high angle tip used on drill bits for automated wood boring machines. V-point drills are used to create thru-holes in sheet stock for dowels or other assembly hardware. Through hole bits are used for locks, door knobs, wiring holes, etc. Specification as below:

Model No.	Drill Dia	Shank Length	Total Length	Rotation
JC03K2057RVT1/LVT1	3	20	57	R/L
JC03K2070RVT1/LVT1	3	20	70	R/L
JC04K2057RVT1/LVT1	4	20	57	R/L
JC04K2070RVT1/LVT1	4	20	70	R/L
JC05K2057RVT1/LVT1	5	20	57	R/L
JC05K2070RVT1/LVT1	5	20	70	R/L
JC06K2057RVT1/LVT1	6	20	57	R/L
JC06K2070RVT1/LVT1	6	20	70	R/L

• Woodworking V-Point Through Hole Drill Bits: this is a special high angle tip used on drill bits for automated wood boring machines. V-point drills are used to create thru-holes in sheet stock for dowels or other assembly hardware. Through hole bits are used for locks, door knobs, wiring holes, etc. Specification as below:

Model No.	Drill Dia	Shank Length	Total Length	Rotation
JC03K2057RVT1/LVT1	3	20	57	R/L
JC03K2070RVT1/LVT1	3	20	70	R/L
JC04K2057RVT1/LVT1	4	20	57	R/L
JC04K2070RVT1/LVT1	4	20	70	R/L
JC05K2057RVT1/LVT1	5	20	57	R/L
JC05K2070RVT1/LVT1	5	20	70	R/L
JC06K2057RVT1/LVT1	6	20	57	R/L
JC06K2070RVT1/LVT1	6	20	70	R/L

 

Grade for Carbide Brazed Tips:
 

ISO Code	Grade	Physical and mechanical properties			Application
		Density g/cm³	Hardness HRA	TRS Mpa
P10	YT05	12.6	92.5	1260	It is suitable for finishing steel and casting steel machining, high cutting speed, low feed rate, and low depth are recommended.
	YT15	11.3	91	1300	It is suitable for the semi-finishing of steel and casting steel machining, high cutting speed and medium feed rate are recommended.
P20	YC201	11.79	91.8	1400	It is suitable for semi-finishing and light roughing machining of steel, casting steel, and stainless steel. It is a suitable grade for a wide application.
	YT14	11.4	90.5	1400	It is suitable for the semi-finishing of steel and casting steel.
P30	YT5	12.8	89.5	1570	Suitable for the heavy-duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions
P40	YC40	13.15	89.5	1650	It is suitable for the heavy-duty turning of steel and also for semi-finishing and  light roughing of stainless steel and alloy steel.
	YC45	12.75	90	2250	Suitable for the heavy-duty turning of steel and cast steel with a big feed rate and also for face milling.
K05	YG3X	15.1	91.5	1300	It is suitable for finishing casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy.
	YG3	15	90.5	1300	It is suitable for semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy.
K10	YM201	13.9	93.0	1600	It  is suitable for semi-finishing of Fe,  Ni high-temperature alloy, cold hard cast irons,  stainless steel with good heat resistance and nonferrous metal. It is a wide application.
	YG6A	14.92	91	1510	It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy.
	YG6X	14.8	91	1560	It is suitable for semi-finishing to light roughing of casting  iron,  nonferrous metal, heat-resistance alloy, and Ti alloy.
K15	YD15	14.94	91	1650	It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy.
K20	YD201	14.89	91.0	1800	It  is  suitable  for  roughing  to  finishing machining of heat-resistance alloy, Ti alloy, casting iron, and aluminum alloy.
	YG6	14.9	89.5	1670	It is suitable for light roughing and semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy.
	YG8N	14.6	89.5	1840	It is suitable for semi-finishing and roughing of  casting  iron, nonferrous  metal, heat - resistance alloy and Ti alloy at continuous and intermittent machining conditions.
	YG8	14.6	89	1840	It is suitable for semi-finishing and roughing of casting  iron,  nonferrous  metal,  heat- resistance alloy and Ti alloy at continuous and intermittent machining conditions.
K30	YL10.2	14.5	91	2000	It is suitable for semi-finishing   of casting iron, nonferrous metal, stainless steel, heat-resistance alloy, and Ti alloy.

Application

1.For chip free drilling of dowel holes in solid wood and wood-based panels;
2.Suitable for cutting MDF, HDF, wood, laminates, chipboards, particle, Acrylic, plexiglass, plastic;
3.Portable boring machines.


 

Our Advantages

Advantages:
1) 100% virgin raw material.
2) Customized,We have over 20 years' experience in the shaped tungsten carbide products.
3) Various kinds of material grades are available based on customer's application.
4) we have professional advanced production line and inspection equipment to ensure high quality products.
5) Advanced technology with precision ground and high polishing process.
6) High wear resistance, high hardness and impact toughness.
7) Excellent after-sales service.

FAQ:

Q1 : Are you factory or trading company ?
We are Factory with 20 years of production experience.

Q2: What is the producing process?
Production process including powder process → formula according to the use requirements → wet grinding → mixing → smash → dry → sieving → add binder → dry again → get the mixture after sieving → pelletize → pressing → forming → sinter-hip → forming (blank) → blanks checking → passivating treatment → cylindrical grinding (according to the customer request) → cleaning → inspection of the finished product → packaging → entering warehouse.

Q3: How to control the products quality?

All products will be tested before bulk production, and we will check the physical properties, shape and tolerance for ensuring qualified products before shipping.

Q4: What is the transportation?
If small quantity , we suggest to send by express, such as DHL,UPS, TNT FEDEX. If with large quantity, suggest to ship by sea.

Q5: Can you provide OEM service?
Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products

Q6: How to place an order for Good performance nonstandard products by stellite alloy?
1. Fill your Order List in our online
Inquiry System (Also you can directly contact our salesperson by E-mail / Skype / Whats App)
2. We will make a feedback to you ASAP after receive your order list.

Q7: What's your delivery time ?
For the normal type which we have mold it takes 7-15 days after receiving the advance payment. For the non standard which we do not have mold it takes 15-35 days after receiving the advance payment.

Q8:How to contact us?
You can Contact me by E-mail, Trademanager, Skype, Mobile, whatsapp and so on