| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 6months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tungsten carbide studs is for high pressure grinding roll, which install on the high pressing machine, thanks to the high wear resistance of our tungsten carbide studs, the working life increased effectively. Qualified carbide studs should with good wear resistance and high compressive strength. Our carbide studs with above characters is suitable for grinding cement clinker, limestone, iron ore, copper, diamond ore...etc. As the core part of vertical impact crusher (sandstone equipment ), carbide column nails is widely used in mining, sand and gravel, cement, metallurgy, hydropower engineering and other industries, aiming at these behaviors that need to withstand high-speed impact and strong wear resistance, using cemented carbide is an ideal choice.
Size information
Here are the main size of our carbide studs, also we can make these buttons according to customers' drawings.
| Carbide studs HPGR | Product name | Dimension | |
| Diameter(mm) | Height(mm) | ||
 |
JC2035 | 20 | 35 |
| JC2040 | 20 | 40 | |
| JC1635 | 16 | 35 | |
| JC1645 | 16 | 45 |
1. Promise the 100% virgin material .
2. Sintere by vacuum sintering furnace and HIP machine with excellent specifications without any hole.
3. Suply blank and surface passivation.
4. Tungsten carbide stud HPGR's high hardness of the cemented carbide and other characteristics are widely used in mining and quarrying and cutting process, also may be placed on a heavy excavators used in bit.
5. We can product the goods according your drawing and sizes.
6. Our new product grade's grain size can up to 6.0μm,highest wear-resisting and excellentest impact resistance.
|
Grade |
Density |
T.R.S |
Hardness |
Application recommended |
|
YG6 |
14.95 |
≥1900 |
≥90.5 |
For coring crowns,electric coal drill bits,coal cutting picks,oil cone bits and scraping knife bits,used in geological prospecting,coal mining and oil well boring. |
|
YG8 |
14.80 |
≥2200 |
≥89.5 |
Used as a core drill, electric coal drill, coal cutter tooth, oil roller bit and scraper button bit. |
|
YG8C |
14.80 |
≥2400 |
≥88.5 |
Mainly used for small and medium-sized drill bit tooth, and as a rotating exploration drill bush. |
|
YG11C |
14.40 |
≥2700 |
≥86.5 |
Most used in the drill bit and rock bit used for cutting high hardness materials ball tooth. |
|
YG13C |
14.2 |
≥2850 |
≥86.5 |
mainly used for rotary drill bit used for cutting high hardness materials in ball mill. |
|
YG15C |
14.0 |
≥3000 |
≥85.5 |
Used in oil cone bit and soft in the hard rock digging cutting tools. |
|
YK05 |
14.8 |
≥2500 |
≥90.5 |
Mostly used as the buttons of small and mediumsized bits to cut soft and medium hard formations |
|
YK15 |
14.6 |
≥2450 |
≥87.6 |
Suitable to strips,conical buttons for rotary percussion-resistant geological prospecting buttons,cut soft and medium hard formations. |
|
YK20 |
14.4 |
≥2500 |
≥86.8 |
Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations, |
|
YK25 |
14.4 |
≥2550 |
≥87.2 |
Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard,hard,and very hard formations. |
| Grade | Grain size | Binder (%) |
Hardness (HRA) |
TRS (Mpa) |
Density (g/cm3) |
Grade Description | Application | ||
| Rock Drilling | Conical Bits | Oil Exploitation | |||||||
| JC30.3 | Medium | 9 | 88.8 | 2800 | 14.55-14.70 | Can be used in mining applications where moderate toughness is required main application include compacts of tricone rock bits for oil and gas drilling | * |
||
| JC30.4 | Coarse | 9 | 87.5 | 2800 | 14.55-14.70 | Can be used for bits of mining and tunnelling, it has excelent toughness and thermal fatigue property | * |
* |
|
| JC35.1 | Medium | 10 | 88.3 | 2800 | 14.55-14.60 | Can be used in mining applications where moderate toughness is required main application include compacts of tricone rock bits for oil and gas drilling | * |
||
| JC20 | Coarse | 10 | 87.5 | 2800 | 14.40-14.60 | Can be used for bits of mining and tunnelling, it has excelent toughness and thermal fatigue property | * | * |
|
| JC40.1 | Medium | 11 | 88 | 2800 | 14.35-14.50 | Can be used in ming applications where moderate toughness is required main application include compacts of tricone rock bits for oil and gas drilling | * |
* |
|
Hunan Jetvision Industrial Co., Ltd.,specialized in production carbide products more than 20 years. We can manufacture all kind of tungsten carbide products. Our products are utilized in industrial, aerospace, machining, metallurgy, oil drilling, mining tools, electronic communications, construction applications. Now we are exporting to 46 countries. including USA, Russian , India , Italy, Poland ,France,Brazil etc .
We mainly produce Tungsten Carbide Ball and Seat, Agriculture wear parts plates, Carbide tips and insert, carbide button, Carbide tiles, HPGR Stud pins, Brazed Inserts, Gripper Pads, Buttons, VSI Bars, Rod, Strips, PDC substrate, Weld on teeth, Bushings, Wire Drawing Dies, Heading Dies, Seal Ring, Nozzles, and other customized carbide products.Our Tungsten carbide products have a variety of specifications, processed and made with high quality raw material. It has the characteristics of high temperature resistance, corrosion resistance, abrasion resistance, high precision and so on.
We have a professional QC team follow to the System of ISO9001:2015, Covering the Raw Materials Incoming, Production Processes,Finished Products and Packaging to ensure high quality products output.
Our Advantages
1) 100% virgin raw materialFAQ:
Q1 : Are you Factory or trading company ?
){kind=link}