| Customization: | Available |
|---|---|
| After-sales Service: | 6 Months |
| Warranty: | 6 Months |
|
Still deciding? Get samples of US$ 60/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tungsten carbide spray nozzle is featured by high hardness, high elastic modulus, good hardness and low coefficient of linear expansion, but also with acid, alkali and good oxidation resistance and other characteristics. It occupies an important position in the modern tools and materials. The hardness of tungsten carbide is much higher than the metal material. Tungsten carbide spray nozzle erosion rate is much smaller than the metal material, its anti-erosion performance is much higher than the metal nozzle. Therefore, the amount of wear of the nozzle is much smaller than the metal spray nozzle. The life tungsten carbide spray nozzles longer than 1 000h, while the life of metal spray nozzle is much shorter than tungsten carbide spray nozzle, such as 1Cr18Ni9Ti nozzle life is only about 200h, and 45 steel less than 100h. So, carbide is the preferred material of the spray nozzle.
HIGH DENSITY CARBIDE NOZZLES: A higher density equals longer lasting than most other brands. These abrasive blasting nozzles are compacted with a premium tungsten carbide material for a heavier weight of 30 grams!
HIGH QUALITY, HIGH PERFORMANCE: All tungsten carbide nozzles are not equal - ASEEDER nozzles feature top wear grade material and durable construction.
LONGEST LASTING: ASEEDER Nozzle roughly estimates these to last 500-800 hours with steel grit, 300-400 hours with slag and 20-40 hours with aluminum oxide abrasive. Actual service life will vary depending on blast pressure, media size, and particle shape.
HIGH QUALITY: These sandblaster nozzles are professionally manufactured by one of the highest respected companies providing unsurpassed wear resistance in abrasion.
we are able to offer premium tungsten carbide sandblaster nozzles that last long and save you money in the long run.
Nozzles Measure 1-5/16 inch long. Large end measures 7/16" in outer diameter tapered to 5/16" in outer diameter at tip end.
Feature:
Tungsten carbide carbide nozzle uses the native saturation, high purity ultrafine cobalt powder and other raw materials, precise carbon ingredients, can tilt the ball mill, vacuum mixing dry, precision pressing, digital skim advanced powder metallurgy sintering pressurized sintering and personalized post-treatment process has the very good by the rigid, high hardness, good wear resistance, high elastic modulus, high strength and good chemical stability, has the very good acid, alkali, high temperature oxidation performance, and carbide nozzle has a lower impact toughness, low expansion coefficient characteristics.
Tungsten carbide nozzles are the most commonly used nozzles in the sandblasting / abrasive blast cleaning industry. They are tough and are best suited for use in harsh work site conditions. These sandblaster nozzles are professionally manufactured by one of the highest respected companies providing unsurpassed wear resistance in abrasion.
Tungsten Carbide Sandblaster Nozzles offer long life and economy.
WC-Co Series:
|
Grade |
Co (wt%) |
Density (g/cm³) |
Hardness (HRA) |
TRS (>=N/mm²) |
|
YG3 |
2.8-3.3 |
15.1-15.3 |
91.0-92.0 |
1380 |
|
YG6 |
5.8-6.2 |
14.6-15.0 |
89.5-91.0 |
1800 |
|
YG8 |
7.8-8.2 |
14.5-14.9 |
88.0-90.5 |
1980 |
|
YG12 |
11.7-12.2 |
13.9-14.5 |
87.5-89.5 |
2400 |
|
YG15 |
14.6-15.2 |
13.9-14.2 |
87.5-89.5 |
2480 |
|
YG20 |
19.6-20.2 |
13.4-13.7 |
85.5-88.0 |
2650 |
|
YG25 |
24.5-25.3 |
12.9-13.2 |
84.5-87.5 |
2850 |
|
YG3X |
2.8-3.3 |
15.1-15.3 |
91.5-92.5 |
1200 |
|
YG6X |
5.8-6.2 |
14.8-15.0 |
90.5-92.0 |
1600 |
|
YG8C |
7.8-8.2 |
14.5-14.9 |
87.0-88.5 |
2020 |
|
YG10C |
9.7-10.2 |
14.2-14.6 |
86.5-88.0 |
2100 |
|
YG12C |
11.7-12.2 |
14.0-14.4 |
86.0-87.5 |
2280 |
|
YG13C |
12.7-13.2 |
13.9-14.3 |
85.5-87.5 |
2320 |
|
YG16C |
15.6-16.4 |
13.9-14.2 |
84-85.5 |
2400 |
|
YG20C |
19.6-20.5 |
13.4-13.6 |
82.0-83.5 |
2460 |
|
YG6A |
5.7-6.2 |
14.8-15.0 |
91.5-92.5 |
1570 |
|
YG610 |
4.3-4.8 |
14.6-14.9 |
92.5-93.5 |
1340 |
|
YG640 |
11.7-12.2 |
13.0-13.5 |
90.5-92.0 |
2100 |
WC-Ni Series:
|
Grade |
Co (wt%) |
Density (g/cm³) |
Hardness (HRA) |
TRS (>=N/mm²) |
|
QU10 |
5.8-6.2 |
14.4-14.9 |
90.0-91.5 |
1760 |
|
QU20 |
14.0-15.5 |
13.5-14.2 |
86.5-88.0 |
2040 |
|
N10 |
5.7-6.2 |
14.5-14.9 |
88.5-91.0 |
1800 |
|
N20 |
7.7-8.2 |
14.3-14.8 |
87.5-90.5 |
2000 |
| Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
| Grade | Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XN100 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 1800 |
| XN101 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 2200 |
| XTN10 | 19.5-20.5 | 6.5-7.5 | 90.5-92.0 | 2800 |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XTT50 | 14.0-15.0 | 8.9-9.5 | 89.0-91.0 | 1600 |
| XTP10 | 7.0-9.0 | 11.5-13.0 | 89.5-91.0 | 1800 |
Details Of Tumgsten Carbide Nozzle
| Type | Dimension (mm) | |||
|
φA ±0.15 | φB±0.15 | φD ±0.15 | |
| XJO1-64 | 6.4 | 20.3 | 15.8 | 6.4 |
| XJO1-71 | 7.1 | 20.3 | 15.8 | 7.1 |
| XJO1-86 | 8.6 | 20.3 | 15.8 | 8.6 |
| XJO1-94 | 9.4 | 20.3 | 15.8 | 9.4 |
| XJO1-109 | 10.9 | 20.3 | 15.8 | 10.9 |
| XJO1-117 | 11.7 | 20.3 | 15.8 | 11.7 |
| XJO1-127 | 12.7 | 20.3 | 15.8 | 12.7 |
| XJO1-142 | 14.2 | 20.3 | 15.8 | 14.2 |
| Type | Dimension | ||
|
φB | φA(φD) | φC |
| XJ02-64 | 6.4 | 18.8 | 14.73 |
| XJ02-71 | 7.1 | 18.8 | 14.73 |
| XJ02-86 | 8.6 | 18.8 | 14.73 |
| XJ02-94 | 9.4 | 18.8 | 14.73 |
| XJ02-109 | 10.9 | 18.8 | 14.73 |
| XJ02-117 | 11.7 | 18.8 | 14.73 |
| XJ02-127 | 12.7 | 18.8 | 14.73 |
| Type | Dimension (mm) | ||||||||
|
φA ±0.25 | φB ±0.25 | φC ±0.25 | φD ±0.20 | φE ±0.20 | F ±1 | G ±1 | M ±1 | K ±0.5 |
| XP01-1 | 24.5 | 30.0 | 5.0 | 9.0 | 18.0 | 50.0 | 69.0 | 21.0 | 130.0 |
| XP01-2 | 24.5 | 30.0 | 8.0 | 12.5 | 20.0 | 50.0 | 69.0 | 21.0 | 140.0 |
| XP01-3 | 24.5 | 30.0 | 10.0 | 13.5 | 21.0 | 50.0 | 69.0 | 21.0 | 170.0 |
| XP01-4 | 24.5 | 30.0 | 13.0 | 19.5 | 27.0 | 50.0 | 69.0 | 21.0 | 226.0 |
| XP01-5 | 30.0 | 36.0 | 6.5 | 12.5 | 19.5 | 54.0 | 70.0 | 20.0 | 130.4 |
| XP01-6 | 30.0 | 36.0 | 8.0 | 12.5 | 12.5 | 54.0 | 70.0 | 20.0 | 141.0 |
| XP01-7 | 30.0 | 36.0 | 11.0 | 15.0 | 12.5 | 55.0 | 69.0 | 21.0 | 200.0 |
| Type | Dimension (mm) | |||||||
|
φA ±0.25 | φB ±0.25 | φC ±0.20 | φD ±0.20 | φE ±0.25 | F ±2 | K ±0.5 | |
| XP02-1 | 32.0 | 25.0 | 6.2 | 8.0 | 16.0 | 45.0 | 78.0 | |
| XP02-2 | 32.0 | 25.0 | 8.0 | 10.0 | 18.0 | 45.0 | 78.0 | |
| XP02-3 | 32.0 | 25.0 | 11.0 | 13.0 | 21.0 | 45.0 | 78.0 | |
| XP02-4 | 38.0 | 32.0 | 6.2 | 6.2 | 16.0 | 45.0 | 80.0 | |
| XP02-5 | 38.0 | 32.0 | 8.0 | 8.0 | 18.0 | 45.0 | 80.0 | |
Carbide nozzle is mainly used in chemical industry, food, machinery, metallurgy, construction and other industries powder, rust removal, cleaning, atomization and so on. There are a variety of specifications, cemented carbide nozzle is cement and other work environment dust pollution is serious dust removal manufacturers preferred environmental protection products, a variety of atomized sheet size and shape accurate, fine particle size, combustion completely. Cemented carbide nozzles can also be used in heating furnaces for burning oil, industrial furnaces and other special purpose heating furnaces.
Tungsten carbide spray nozzle has good wear resistance, long life, is the key determinant of coating efficiency and coating quality. When the paint, the paint atomization, flow, spray rate by the geometry of the nozzle, with the pore size determined by the accuracy of machining. Select the nozzle and its technical parameters has become the key painting is one of the coating efficiency and coating quality assurance of the most effective means.
Tungsten carbide spraying nozzles spcification
Use superfine nanometer tungsten carbide particles, the wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten carbide,The service life of the nozzle.Cobalt content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3, bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal expansion coefficient, unique high hardness and density, far beyond the other similar products, the use of hard Alloy tube abrasion resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its selection is very important.Sand tube material, in general, must have high hardness, high resistance Grinding, both be short of one cannot.Generally for tungsten carbide composite materials processing.Usually, cemented carbide, WC as the main resistance,Grinding phase exists in the form of particles, CO, just as the binder.
1) 100% virgin raw material
2) Customized,We have over 20 years' experience in the shaped tungsten carbide products
3) Various kinds of material grades are available based on customer's application
4) we have professional advanced production line and inspection equipment to ensure high quality products.
5) Advanced technology with precision ground and high polishing process
6) High wear resistance, high hardness and impact toughness
7) Excellent after-sales service
Hunan Jetvision Industrial Co., Ltd.,specialized in production carbide products more than 20 years. We can manufacture all kind of tungsten carbide products. Our products are utilized in industrial, aerospace, machining, metallurgy, oil drilling, mining tools, electronic communications, construction applications. Now we are exporting to 46 countries. including USA, Russian , India , Italy, Poland ,France,Brazil etc .
We mainly produce Tungsten Carbide Ball and Seat, Agriculture wear parts plates, Carbide tips and insert, carbide button, Carbide tiles, HPGR Stud pins, Brazed Inserts, Gripper Pads, Buttons, VSI Bars, Rod, Strips, PDC substrate, Weld on teeth, Bushings, Wire Drawing Dies, Heading Dies, Seal Ring, Nozzles, and other customized carbide products.Our Tungsten carbide products have a variety of specifications, processed and made with high quality raw material. It has the characteristics of high temperature resistance, corrosion resistance, abrasion resistance, high precision and so on.
Quality Control
We have a professional QC team follow to the System of ISO9001:2015, Covering the Raw Materials Incoming, Production Processes,Finished Products and Packaging to ensure high quality products output.
FAQ:
Q1 : Are you Factory or trading company ?
){kind=link}