| Customization: | Available |
|---|---|
| After-sales Service: | 6months |
| Warranty: | 6months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A tungsten carbide bushing is a wear part made from tungsten carbide, a material that is hard, tough, and resistant to corrosion and abrasion.
Tungsten carbide bushing applications is widely, which is a device to protect a class of components. It is in the actual work and the role and purpose of its application environment have a great relationship.
Size: D0.3MM-50MM, customised
Valve applications, bushings be installed in the valve stem cap trap, in order to reduce the valve leakage, to seal;
Bearing applications, the use of bush to reduce wear between the bearing and the shaft seat, avoid the gap between the shaft and the hole increases and so on.
Properties
Tungsten carbide bushings are known for their high hardness, toughness, and wear resistance.
They are also efficient at conducting heat.
High Hardness: Exceptional resistance to deformation and wear during operation.
Wear Resistance: Maintains dimensional accuracy over extended production cycles.
Thermal Stability: Performs reliably under high temperatures and thermal shock conditions.
Corrosion Resistance: Suitable for working in humid or chemically aggressive environments.
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | |||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | |||
| YG3 | K01 | 97 | 3 | 14.9 | 91 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. |
| YG6 | K10 | 94 | 6 | 15.1 | 92 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. |
| YG6X | K20 | 94 | 6 | 15.1 | 91 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. |
| YG8 | K20-K30 | 92 | 8 | 14.9 | 90 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. |
| YG10 | K40 | 90 | 10 | 14.7 | 89 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. |
| YG10X | K40 | 89 | 10 | 14.7 | 89.5 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. |
| YG15 | K30 | 85 | 15 | 14.7 | 87 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. |
| YG20 | K30 | 80 | 20 | 13.7 | 85.5 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. |
| YG20C | K40 | 80 | 20 | 13.7 | 82 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. |
| YG30 | G60 | 70 | 30 | 12.8 | 82 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. |
Details Carbide Bushing
Dimension of A Type Straight Sleeves (mm)
| |
||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-56.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-13.0 | 15.0-25.0 |
| Notice:a=1.6, 3.2 | ||||
|
||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-556.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-16.0 | 15.0-25.0 |
|
||||
| Type No. | D | d | H | C |
| XA1 | 14.5-20 | 12.16 | 6.0-10.0 | 1.3 |
| XA2 | 12.5 | 3.5-7.0 | 12.7 | 4.5 |
| XA3 | 21-60 | 15-50 | 51 | 3 |
| XA4 | 75-130 | 60-115 | 55-100 | 6 |
| XA5 | 140-300 | 120-200 | 60-150 | 10 |
|
||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-556.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-16.0 | 15.0-25.0 |
|
||||
| D | d | C | F | H |
| 38.0-50.0 | 35.0-45.0 | 30.0-35.0 | 20.0-30.0 | 27.0-40.0 |
| 51.0-100.0 | 46.0-95.0 | 35.0-80.0 | 20.0-30.0 | 30.0-50.0 |
|
|||
| D | d | C | H |
| 25.0-30.0 | 9.0-14.0 | 2.0-3.5 | 21.0-25.0 |
| 31.0-50.0 | 14.0-35.0 | 2.0-3.5 | 21.0-25.0 |
| 60.0-100.0 | 47.0-85.0 | 2.0-3.5 | 30.0-70.0 |
Applications
Tungsten carbide bushings are used in a variety of applications, including pumps, compressors, and flow control projects. They are especially suited for high pressure or corrosion resistant pumps in the oil and gas industries.
Tungsten carbide bushing production and processing of high-strength, can withstand prolonged load, with high chemical stability, alkali, alcohol, ether, hydrocarbons, acid, oil, detergent, water (sea water), and has no smell , non-toxic, tasteless, non-rust characteristics, its widely used in petrochemical industry for Submerged Oil Pump, slurry pump, water pump, Centrifugal Pump,etc.
Our advantages
1. Use 100% Raw material, strict incoming inspection.
2. Over pressure sintering, increasing the densification of the alloy teeth and increasing the 30% life span.
3. Can be customized according to the requirements of the customer.
High hardness, high T.R.S. and high corrosion resistance, high precision.
Good chemical stability (acid resistance, alkali resistance, high temperature oxidation)
Low expansion coefficient, thermal conductivity, electric conductivity.
Package&Shipping
1.One plastic pipe pack one piece,10 pcs per group
2.Put goods enclosed with air bubble paper into box
3.Other package is accepted according to customer's requirement
Hunan Jetvision Industrial Co., Ltd.,specialized in production carbide products more than 20 years. We can manufacture all kind of tungsten carbide products. Our products are utilized in industrial, aerospace, machining, metallurgy, oil drilling, mining tools, electronic communications, construction applications. Now we are exporting to 46 countries. including USA, Russian , India , Italy, Poland ,France,Brazil etc .
Why choose us:
1. Experienced with new producing technology and facilities of surface treatment to improve hardness,corrosion resistance
erosion resistance with lower cost.
2. Customized service is available according to client's drawings or requirements.
3. Production lines entirely accord with International Quality Certification of ISO9001.
4. Factory direct sale with 20-30% price off.
5. More flexible production management with faster lead time.
FAQ:
1.Q:What's your common incoterms used?
A:EXW, FOB, CIF, FCA.
2.Q:What is your payment terms ?
A:T/T 100% in advance Or 60% deposit, 40% before shipment. Negotiable based on customers' credibility and order amount.
3.Q:What is the lead time for carbide parts ?
A:Usually it is 35-45 calendar days based on order qty.
4.Q:How do you ensure products quality?
A:We have a strict quality process based on ISO9001-2015 and professional inspection tools such as metallographic examination, caliper, micrometer, thread gauge, 3D imaging instrument.
5.Q:Which countries do you trade with?
A:Our products are exported to USA, UK, Russia, India, Singapore, UAE, Iraq, Pakistan, Norway, Hungary, etc.
){kind=link}